Fw runtime services efi clover

Fw runtime services efi clover

So making a config. It just takes some time but this guide will tell you how to configure everything, you won't be left in the cold. This also means if you have issues, review your config settings to make sure they're correct. Main things to note with OpenCore:. And read this guide more than once before setting up OpenCore and make sure you have it set up correctly.

Do note that images will not always be the most up-to-date so please read the text below them, if nothing's mentioned then leave as default. And with our system, its even required to boot. Note that you should not add your generated DSDT. So if present, remove the entry for it in your config. Compiled SSDTs have a. For us, our patches are handled by our SSDTs.

This section is dedicated to quirks relating to boot. This section is allowing devices to be passthrough to macOS that are generally ignored, for us we can ignore this section. Settings relating to boot. Note : With macOS We also add 2 more properties, framebuffer-patch-enable and framebuffer-stolenmem. The first enables patching via WhateverGreen. More info on this is covered in the Post-Install Page. Here's where you specify which kexts to load, order matters here so make sure Lilu.

Everything else should be left as default. The reason being is that UsbInjectAll reimplements builtin macOS functionality without proper current tuning.

Hackintosh Tools #27 - Установка/Обновление / UEFI / Legacy (Clover Reloaded)

It is much cleaner to just describe your ports in a single plist-only kext, which will not waste runtime memory and such. These values are based of those calculated in OpenCore debugging.Forgot your password? Or sign in with one of these services. By AldaroJuly 18, in OSx86 I have been running macOS Mojave on my system for 3 months and everything was working pretty well. After taking an update for clover, my entire system got wrecked, and I cannot even boot to an installation environment anymore which I really need to do since I am starting back at square one.

I still have the old EFI folder backed up, but I know it'll only be a matter of time before Apple introduces an update that requires me to update Clover in order to work correctly.

I have tried all the available memory fixes, but none of them seem to work. I was previously using the original osxaptiofix; so, I gave v2, and v3 a try, but to no success. I read somewhere on the main discussion board for clover that AptioMemoryFix was no longer going to be supported and I therefor decided to skip over it not to mention it isn't even available in newer clover installation packages.

CPU Intel core i5 k stock 3. Disabled Windows specific features and secure boot. Enabled Above 4G decoding.

fw runtime services efi clover

Disabled onboard NIC since it is made irrelevant by my intel i Below are images of the errors I am receiving when trying to boot the macOS Mojave installer. Anyway, if somebody can help me figure out what's going on, that'd be greatly appreciated.

My ultimate goal is to get an install with minimal clover patches as to be better prepared when the winds of change from Apple come roaring. I know how to solve this problem! You need to be a member in order to leave a comment. Sign up for a new account in our community. It's easy! Already have an account? Sign in here. OSx86 Existing user? Sign in anonymously. Or sign in with one of these services Sign in with Facebook. Sign in with Twitter. Spoiler tag - With video guide.

Posted July 18, edited. Share this post Link to post Share on other sites.

General question EfiRuntimeServices

Posted October 25, Posted October 26, Posted April Create an account or sign in to comment You need to be a member in order to leave a comment Create an account Sign up for a new account in our community. Register a new account. Sign in Already have an account? Sign In Now. Announcements Problems with donation.Hello, tested using Clover xmacos I've got a reply from the author sand they tell me, that they only suport the "variables related funtions" of the EFI Runtime Services. I tried this and if I restrict myself to those functions, it does work.

I disagree.

UEFI OS Indication Variables

The change made AptioFix unusable. AptioFix2 is only driver that works properly. The code just needs cleaned up. I see no point in removing code and making it an external dependency. Especially when it's the same code, just moved somewhere else This version works equally well on all my mainboards.

It works even better than the old AptioFixes read not vitwhich showed some weird behaviour with AppleEFIRuntime on some mainboards. I'm using Anyway AptioFix2, regardless of author, crashes at boot on my systems. Help Create Join Login. Operations Management. IT Management. Project Management. Services Business VoIP. Resources Blog Articles Deals. Menu Help Create Join Login. Owner: nobody. Updated: Created: Creator: Brumbaer. Cheers Stephan. Slice - If I remove one PCIe device, it boots fine.

Attached DSDT. I see some memory compilation errors in the DSDT. Tickets: No the bug in the firmware is that it's not properly restoring the memory map to the default memory map, I'm not sure why on earth it wouldn't generate the memory map every boot no matter what but whatever. The actual issue here is that the memory is fragmented too badly to allocate a large chunk. The test lowmemfixdrv is definitely not a solution, it's really a poor excuse for a workaround too.

EDIT: Although it may be a firmware bug that the memory is being allocated so fragmented across the lower memory, however I kind of expect that there's a bunch of stuff asking for whole pages of memory and it's nonchalantly just grabbing them from the next biggest available chunk, instead of in order.

What do you mean by the memory map is not properly restored? Does it use the memory map from boot 1 in boot 2 if a warm reboot is done? Does it still list freed memory as allocated?

Would be cool if you could put some light on this. I should post, so that I may help in this case. Already know what the issue is, it's caused by memory fragmentation during boot services where there's no enough contiguous free space to either move runtime areas that are in the way of where the kernel needs to be, or to load the kernel itself.

Just not sure how to fix this at the current moment. No, not really I know what the problem is just no idea how to fix it and I don't have the hardware to test as I don't have this problem myself which makes it difficult to fix.

I've got a million things on my plate right now so clover has kinda taken a back burner For now, you should be able to get it working with the modified driver in this ticket. If you're planning on putting together an X99 build soon, I'll throw in for some part of it. Hopefully you do! We would all love to come up with a more permanent solution. Thanks dude! I'd like to get an X99, but not sure when I'd be able to get the extra money, I have a lot of medical expenses currently I'm still trying to think of a solution even without the hardware, I haven't forgotten or given up, just busy So you effectively only have one pcie card then?

fw runtime services efi clover

The gigabyte card doesnt work on the asus board from what i have read so i imagine its not even detected by your board but still acts as a pass through device somehow. Are you feeding into the thunderbolt from your gfx card? Also which two fixes did you use and was your error exactly the same as originally posted?Forgot your password? Or sign in with one of these services. By apiantiJuly 1, in Clover. Just so you all know I actually have done something.

I have pushed the source to both my github and to sourceforge, please commit to the experimental branch and I will merge it into the stable branch once it is safe. Also, nothing meaningful happens yet so don't get too excited. Only the Visual studio build works right now. I haven't set up the Xcode or Makefile builds yet, I'm trying to do them now. EDIT5: I am also doing some weird stuff to keep the repo clean so you may notice that I keep deleting and reuploading, this is to keep the initial commit.

Once there is working bootloader then commits will be made to "experimental" branch and merged into "stable" branch if they are stable. I will then make tags for releases and such. I would like to focus more time on Clover but I don't have the free time because I'm working on other paying jobs. Compilation successful. I am working on the Xcode project. There is not much to be seen, as mostly only debug information is printed out, there is no GUI yet.

You can run in virtual machine, I have devised some methods for determining if running in a VM. I'd really like to see that it detects everyone's stuff correctly. So if you did try can you please provide me with the log? It just appends. You can change the path with config. I'll have to write out some configuration keys that are available. The configuration path. There is a built-in default config. Then the file at this location is parsed.

Here is ISO, if anyone prefers that to just the binary. Can't test ARM archs so unsure if they work, the other two should though. I have not tested with Parallels so I wonder what the outcome will be, the serial logging is disabled in the ISO, so there will be nothing to capture unless it captures console output like Qemu and outputs that to a log file.

Don't get too far ahead as it is still not functional yet for use EDIT2: Seriously, though, I won't be able to work on clover for a while if I don't get donations because I will have to work on other stuff to not die. Lol, I posted that one so you can get the log to a file to post, I need to see the information above what could be seen as well.

fw runtime services efi clover

Did you connect a serial output file in the hardware options for the virtual machine? Post that file. I need some data. Let me reupload these with out the test default config. Nah, it took no effort really to have them and I'm making the bootloader more universal. There is UEFI on U-Boot so you could use this on any U-Boot device like raspberry pi to prevent having to rebuild whenever you want to replace your kernel.

Really nothing to do with macOS though, lol. I also think that it shouldn't perform any OS specific actions until the OS is selected to boot, except for filesystem drivers. This will make it quicker to start and not mess up anything for OSes that don't need anything but chainloaded like windows.The booter now has the ability to load additional kernel extensions from a ramdisk supplied by a multiboot loader.

The ramdisks are supplied in the form of Multiboot modules. Note that the extensions or the extension archive from the ramdisk is loaded in addition to the extensions or extension archive on the boot volume. You cannot reliably provide modified versions of existing extensions on the boot volume nor can you cause the booter not to load the extensions on the boot volume.

That said because of the way IOKit works it is usually possible to add kernel extensions which match better than other kernel extensions. It is also possible to add kernel extensions which cause existing driver classes in existing kernel extensions to match on more hardware. Instead it contains only an Info.

Oh no! Some styles failed to load. 😵

This method can be generally used to add support for a variety of hardware. Unlike the current "hackintosh" methods, this method does not break when Apple updates the OS. To use this new support you will need something capable of loading the booter as if it were a Multiboot kernel and loading a flat disk image file as if it were a multiboot module.

You will need the mboot. In practice it's typically 0x9f but various reports indicate it can be anything. You will need a recent syslinux I used 3. Those of you who have been using my booter in Multiboot mode may remember the 2-second delay giving you an opportunity to enter a different BIOS device. Furthermore, once you are in the booter at the boot menu pressing the escape key will now drop you to the drive selector instead of booting the default entry.

The drive selector is basically the same as before but it's nice that you can enter it as many times as you wish instead of having to reboot the machine.

Obviously this user-interface is still a work in progress. To do so you merely need to provide whatever extensions you need to make OS X work in your initrd file. When you run the booter you won't have any choices on the boot menu. Simply press escape to bring up the drive selector.See section 7. It contains a UINT64 bitmask that used to indicate which features the OS wants the firmware to enable or which actions the OS wants the firmware to take.

The OsIndicationsSupported variable is managed by the firmware. The variable is recreated by the platform firmware every boot and cannot be modified by the OS. It also returns a UINT64 bitmask which indicates which of the OsIndications features and actions the firmware supports.

Sorry but I do not have the time to support other tool chains such as Visual Studio, other binary formats, or other development environments. As usual the full, possibly updated. Here is a screen shot of the output when I recently ran the utility on my Lenovo T Now that UEFI firmware is firmly established in the PC and server world, it is probably time that the vendors started certifying their firmware as conforming to a specific version of the UEFI specification.

Musings of an OS plumber. GitHub Repositories. All rights reserved. StrCmp Argv[1], L"--version"! StrCmp Argv[1], L"--help"! StrCmp Argv[1], L"-h"! StrCmp Argv[1], L"-?


April 28th, Enter your email address. We use cookies to ensure that we give you the best possible experience on our website. I Accept Cookie Policy. April 28th, Comments are closed. All Rights Reserved We use cookies to ensure that we give you the best possible experience on our website.